IFM Fiber optic sensors OU5043
Weight: 0.075kg
Working voltage: 10...36 V DC
Electrical design: DC PNP
Output function: light mode
Sensing range: 0...0.12m (through-beam sensor)
Range: 0...40mm (diffuse reflection sensor)
Rated current: 250 mA
Switching frequency: 100 Hz
Light type: infrared light wavelength 880nm
Connection method: M12 connector
Ambient temperature: -25 ... 80°C
Protection: IP65
Switch status display: LED yellow
Fiber optic sensors should be used in areas where the position of the photoelectric standard sensor is too small. The advantage of this system: The processing display and optoelectronic components are installed separately from the beam entry and exit holes, so the sensor head of the optical fiber sensor can be installed in difficult-to-access locations. The housing material of the OU5043 photoelectric sensor adopts modified PPO (polyphenylene ether), and the lens material is glass. Light weight, small size, easy to use. If the through-beam lens group is connected, the light-on mode indicates that the output function is "normally closed". If the diffuse mirror group is connected, the light on indicates that the output function is "normally open". The product has passed the B grade certification of EN 60947-5-2 and EN 55011. Can be equipped with sockets and other installation accessories.